Trailer Axle and Trailer Parts

 

 

 

Electronic trailer brake controller for trailers using one or two trailer brake axles with electric brakes.

Tekonsha Accutrac




Electronic Brake Controller for 2 and 4 trailer brake applications

A – Hard effort brake setting

B – Soft effort brake setting

C – Bi-Color Light

D – Manual Slide Knob

E - Brake Mounting Holes

F - Internal Sensor Arm

The Light is:

GREEN – When trailer is connected

RED – When brake pedal or manual is activated and trailer is connected

The green light draws 10 milliamperes of current for tow vehicle of current from the tow vehicle taking over 5,000 hours to drain the tow vehicles battery.

The brake controller has independent soft and hard effort brake settings.

Soft Effort – setting for gradual stops, which allows for effective braking without the wheel hop.

Hard Effort – setting for hard or panic stop, which is sensed by the Internal Sensor and braking effort is automatically switched over to the hard effort setting.

Includes installation instructions

$45.99.

Tekonsha Voyager
Tekonsha Voyager Electric Trailer Brake Controller Inertia or Pendulum style controllers are enabled by the brake pedal switch and activated by a Pendulum Circuit that senses the vehicle's stopping motion and applies a proportional voltage to the trailer's brakes. The Brake Controller must be mounted and calibrated level.

Voyager is a new industry standard. The Voyager is a brake controller for single, tandem, triple, and four axle trailers equipped with electric brakes. It has a patented sensor that makes traveling a smooth experience. Green LED monitors a secure connection with trailer and changes to red to indicate increase of power to the trailer brakes.

Features:

The unit is more attractive, easier to install, and makes better use of space.

Recessed controls protect gain and level settings from accidental readjustment.

Ergonomically designed control lever for easy, accurate gain and level settings.

Traditional 4-wire hookup and under-dash U-bracket assure secure and permanent installation.

System is compatible with virtually any 12-volt, negative ground tow vehicle, foreign or domestic.

Broad control range makes setting quick and easy.

The green LED display tells you that the unit is on and there is a complete circuit with the trailer brakes.

As braking power is applied, the LED changes color gradually from green to red, to indicate relative braking power.

The advanced electronics in the Voyager minimizes false braking, to give you a smoother ride, even on the roughest roads.

Voyager has a five-year limited warranty.

DIMENSIONS 3"W x 5"L x 1.5"H

$65.99

DIGITRAC II
The new AccuPower® DigiTrac® II Electric Brake controller is an excellent choice for your demanding heavier loads and constantly changing load conditions (as in transportation of horses and live-stock). Digitrac® II is able to detect the difference between a gradual deceleration like slowing to a traffic light and the stopping power required when braking for an unexpected event. It's advanced electronics and patented Inertia Sensing System are designed for consistent and predictable stopping power. The Inertia Sensing System uses two separate power delivery controls - one for the "around town" gradual stopping and one for the urgent sudden stops. The dark smoke lens is ideal for direct light applications, creating optimum visibility to read the large two-digit display. DigiTrac® II's digital display shows voltage output to brakes with additional protection against short circuit or loss of ground. Capable of handling up to 4 axle trailers.

DigiTrac® II Features

· Separate slide controls adjust braking action for different towing loads

· Large easy to read dual digital display shows:

· Properly wired control

· Voltage output to brakes (vs. a percentage output)

· Connection to trailer

· Dark smoke lens ideal for direct light applications; performs better then red lens

· Protection against short circuit and loss of ground

· Standard mounting bracket and ball mount included

· For use on any 12 volt negative ground system

$55.99

PRODIGY
PRODIGY® is the most advanced and intelligent approach to trailer brake controls. PRODIGY®, requiring no manual leveling, is a technological breakthrough among inertia-activated brake controls. Equipped with a self-adjusting sensing device similar to the one used in guided-missile technology to allow for easy, flexible installation — from nearly horizontal to nearly vertical — PRODIGY® constantly adjusts itself to the position of the tow vehicle.

Prodigy® Features

Applies power to the trailer brakes in proportion to vehicle's deceleration. No level adjustment necessary - it adjusts itself to varying terrain as you drive. The only inertial control that works proportionally in reverse - great for backing into tough spots. Digital display depicts voltage delivery to trailer during braking. Continual diagnostics check for proper connection, shorted magnet condition and much more. Exclusive "boost" feature gives users the ability to apply more initial trailer braking power when towing heavier trailers. Power-saving mode reduces drain on battery when vehicle is not in use. Pre-assembled wire harness for simple hookup. Unique pocket mount allows for flexible mounting options. Quick and easy disconnect feature allows user to remove and store the control when not in use. Made for up to four-axle trailer brake systems. Meets N.H.T.S.A. regulations regarding tow vehicle/trailer light activation

$125.99

Email Sales

Home
Breakaway Kits

All sales are in the continental United States only.
Visa, Discover, MasterCard, American Express, Pay-Pal, checks & money orders accepted.

256-531-6556
8 AM - 5 PM Monday - Saturday CST

Photos on website may not reflect actual product ordered.
Prices are subject to change without notice.

20% restocking fee for returned Items.